Product Description
These are the disks to restore the factory sounds to your PA-80. Follow these instructions to restore your PA-80.
Go to the Pa80 Disk > Utilities 1 page and select “Restore Data”.
2.
The “Restore from FD (Yes) or HD (No)?” message appears. Press ENTER/YES
to select the floppy disk.
3.
The “Are you sure?” message appears. Press ENTER/YES to continue (or EXIT/
NO to abort).
4.
The “Insert backup disk #1 and press Enter” message appears. Insert the first
backup disk, and press ENTER/YES.
5.
Wait until the first backup disk has been loaded. A message will appear: “Insert
backup disk #2 and press Enter”. Insert the second backup disk and press
ENTER/YES.
6.
Repeat the same procedure with backup disks #3, #4 and #5. When the backup
disk #5 has been loaded, the backup data has been restored into the internal
memory.
Note:
After the last disk has been loaded, the “Some files missing” message may
appear. This may refer to some User data, so it is not a problem. Press EXIT to exit
the message.
7.
When the Wait message has disappeared, and the WRITE/DISK IN USE LED has
turned off, turn the instrument off, then on again.
Any files on this disk are being provided free of charge and are readily available for download on the internet. We are charging only for the disk and labor involved in preparing the disk for your use.